Release Notes
-------------

This firmware is intended to be used with teh OpenWrt 'sysupgrade' command.
Do not use it to flash a WR703N device from the original factory firmware. Use the 'factory' version instead.

1. After flashing this firmware the unit will start up with the default IP address 10.130.1.20 and netmask 255.255.255.0

2. The Fallback IP will also be available at 172.31.255.254 with netmask 255.255.255.252.
   To use this address, connect via Ethernet cable and set your PC to a static address of 
   172.31.255.253 and netmask 255.255.255.0 

3. To log in to the device use ssh with login: root and password: admin
   There is also a second account available with credentials of admin / admin
   This is intended for use with the web configuration if Authentication mode is selected 
   so that the root account password does not need to be handed out. 
   Both accounts will work with the web interface.