***  CAUTION  ***

Please be aware that this firmware is BETA and is for development and testing purposes only.

Please *do not* use this firmware in production systems.

The firmware files are for SYSUPGRADE i.e. to be installed on a device which already has a copy of OpenWrt installed.
It is not suitable for installation on a device running the manufacturer's original firmware.

To istall an initial version of OpenWrt, use the FACTORY version of the firmware from OpenWrt.
The Attitude Adjustment firmware is recommended, currently at 12.09 RC1, available at:

http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/

Download the 'factory' image for your device and install from the manufacturer's Upgrade page.

Once OpenWrt is running, install the VT SECN firmware using the OpenWrt Upgrade page.
*** Be sure to un-tick the "Save Settings" checkbox before you upgrade, otherwise the SECN settings will not be loaded ***

To install manually, copy the firmware file to /tmp on the device, then install with:

   cd /tmp
   sysupgrade -v -n ./<filename>   # Note the use of -n flag to ensure settings are not saved!!


The firmware has been tested only on a limited range of devices before posting, notably WR703N, WR842ND, MR3020, WDR4300.
If you install and test on one of the other devices please post to the VT Dev list and advise the outcome.

Do not flash firmware that has been downloaded without checking the MD5 Sum for the file.
If the file is corrupted you will likely brick your router.

Enjoy!